PEEK HPV
(PTFE + Carbon + Graphite – Bearing Grades)
Sheets | Rods | Tubes | Custom Machined Components Modified PEEK, commonly referred to as Bearing Grade PEEK, is engineered with a combination of PTFE, carbon fiber, and graphite to significantly enhance tribological performance. These modifications reduce friction, improve wear resistance, and enable dry-running capabilities under high loads and speeds. Enquiry Now →
Polyamide
Sheets | Rods | Tubes | Cast Blocks | Custom Machined Components
Nylon, commonly available as PA6 (Polyamide 6) and PA66 (Polyamide 66), is a high-performance engineering thermoplastic known for its excellent mechanical strength, wear resistance, and good chemical resistance. It is one of the most widely used materials in mechanical and load-bearing applications.
In solid form, Nylon is available as extruded and cast sheets, rods, tubes, and blocks for machining and structural applications. Cast Nylon (PA6G) is especially preferred for heavy-duty industrial components due to its improved mechanical strength, reduced internal stress, and better dimensional stability in large sizes.
Nylon offers excellent abrasion resistance, high tensile strength, and good fatigue resistance.
Enquiry Now →
Polyether Ether Ketone Filled Polytetrafluoroethylene
Sheets | Rods | Tubes | Custom Machined Components
PEEK-Filled PTFE is one of the most technically advanced filled PTFE compounds available. By incorporating finely dispersed PEEK (Polyether Ether Ketone) particles into the PTFE matrix, this grade achieves a remarkable combination of properties that neither material alone can provide: the chemical inertness, low friction, and non-stick character of PTFE combined with the exceptional mechanical strength, hardness, and creep resistance of PEEK.
The result is a high-performance sealing and bearing material that withstands higher loads, higher speeds, and more aggressive chemical environments than any standard single-filler PTFE compound — including glass-filled, carbon-filled, or bronze-filled grades. It is the compound of choice for the most demanding dynamic sealing, high-pressure, and high-temperature applications in oil & gas, chemical processing, aerospace, and semiconductor industries.
Enquiry Now →
Polyether Ether Ketone Filled PTFE
Sheets | Rods | Tubes | Custom Machined Components
PEEK-Filled PTFE is one of the most technically advanced filled PTFE compounds available. By incorporating finely dispersed PEEK (Polyether Ether Ketone) particles into the PTFE matrix, this grade achieves a remarkable combination of properties that neither material alone can provide: the chemical inertness, low friction, and non-stick character of PTFE combined with the exceptional mechanical strength, hardness, and creep resistance of PEEK.
The result is a high-performance sealing and bearing material that withstands higher loads, higher speeds, and more aggressive chemical environments than any standard single-filler PTFE compound — including glass-filled, carbon-filled, or bronze-filled grades. It is the compound of choice for the most demanding dynamic sealing, high-pressure, and high-temperature applications in oil & gas, chemical processing, aerospace, and semiconductor industries.
PEEK filler is chemically inert, meaning it does not corrode, leach, or react with process media — making PEEK-filled PTFE safe for pharmaceutical, food-contact, and ultra-high-purity environments. There is no metallic contamination risk.
Enquiry Now→
Hot
Polyethylene Terephthalate
Sheets | Rods | Tubes | Custom Machined Components
PET (Polyethylene Terephthalate) is a high-strength, semi-crystalline engineering thermoplastic known for its excellent dimensional stability, high stiffness, and low moisture absorption. It offers a superior combination of mechanical strength and precision performance compared to many standard engineering plastics.
Solid PET material is available in sheets, rods, and tubes for precision machining applications. Due to its low water absorption and excellent creep resistance, PET is particularly suitable for tight-tolerance components operating under load.
Enquiry Now →
Polyethylene Terephthalate
Sheets | Rods | Tubes | Custom Machined Components
PET (Polyethylene Terephthalate) is a high-strength, semi-crystalline engineering thermoplastic known for its excellent dimensional stability, high stiffness, and low moisture absorption. It offers a superior combination of mechanical strength and precision performance compared to many standard engineering plastics.
Solid PET material is available in sheets, rods, and tubes for precision machining applications. Due to its low water absorption and excellent creep resistance, PET is particularly suitable for tight-tolerance components operating under load.
Enquiry Now →
Polypropylene (PP) Plastic
Sheets | Rods | Pipes | Fittings | Custom Machined Components
Polypropylene (PP) is a semi-crystalline thermoplastic polymer produced through the catalytic polymerisation of propylene and belongs to the polyolefin family. It is a lightweight and versatile engineering plastic widely used across industrial, electrical, chemical, and manufacturing applications due to its excellent balance of chemical, mechanical, and electrical properties.
PP offers excellent resistance to a wide range of chemicals, including acids, alkalis, and many solvents, making it suitable for demanding industrial environments.
Enquiry Now→
Polyvinylidene Fluoride
Sheets | Rods | Pipes | Fittings | Custom Machined Components
PVDF (Polyvinylidene Fluoride) is a high-performance fluoropolymer known for its exceptional chemical resistance, high purity, and excellent mechanical strength. It is widely used in demanding chemical, pharmaceutical, and high-temperature industrial environments where long-term reliability is critical.
PVDF material is available in sheets, rods, and pipes for fabrication and precision machining applications. It offers superior resistance to aggressive chemicals, acids, solvents, and oxidizing agents compared to many conventional engineering plastics.
Enquiry Now →
POM (Polyoxymethylene)
Sheets | Rods | Tubes | Custom Machined Components
POM (Polyoxymethylene), commonly known as Acetal and widely recognized under the trade name Delrin®, is a high-performance engineering thermoplastic known for its excellent dimensional stability, high stiffness, low friction, and outstanding machinability.
Among its advanced grades, Delrin® AF (Acetal + PTFE fiber filled) is specifically engineered for low-friction and wear-resistant applications. Delrin® AF combines the strength and rigidity of acetal with the self-lubricating properties of PTFE fibers, resulting in significantly reduced wear, lower coefficient of friction, and improved performance in dry-running environments. This makes it particularly suitable for sliding, bearing, and precision motion components where lubrication is limited or not preferred.
Enquiry Now →
Showing 19–36 of 42 results