Black PEEK
Sheets | Rods | Tubes | Custom Machined Components
Black PEEK is a pigmented version of Virgin PEEK that offers the same high-performance characteristics with improved UV resistance and better visual identification. The addition of black pigment enhances resistance to light exposure and makes it suitable for outdoor and visible applications where aesthetics or part identification is important.
It maintains excellent mechanical strength, thermal stability, and chemical resistance, similar to natural PEEK.
Enquiry Now →
Bronze-Filled Polytetrafluoroethylene
Available in 40%, 60% bronze-fill levels | Sheets | Rods | Tubes | Machined Parts
Bronze-Filled PTFE is the highest load-bearing grade of filled PTFE. The addition of bronze powder substantially improves compressive strength, wear resistance, and thermal conductivity — making it ideal for heavily loaded dynamic applications such as hydraulic piston rings, guide rings, and bearing pads.
Its excellent thermal conductivity allows efficient heat dissipation at friction surfaces, extending service life in demanding environments.
Enquiry Now →
Carbon-Filled PEEK
Sheets | Rods | Tubes | Custom Machined Components
Carbon-Filled PEEK is reinforced with carbon fibers to provide superior strength, stiffness, and thermal conductivity. It also offers excellent wear resistance and reduced thermal expansion, making it ideal for precision components operating under high loads and temperatures.
Enquiry Now →
Carbon-Filled Polytetrafluoroethylene
Available in 15%, 25% carbon-fill levels | Sheets | Rods | Tubes | Machined Parts
Carbon-Filled PTFE is reinforced with carbon powder or carbon fibres to enhance hardness, wear resistance, thermal conductivity, and dimensional stability compared to Virgin PTFE.
It performs well in high-speed, high-temperature, and dynamic sliding applications while maintaining excellent chemical resistance.
Enquiry Now →
carbon-graphite-filled-Polytetrafluoroethylene
Hybrid compound for dynamic sealing | Sheets | Rods | Tubes | Machined Parts
Carbon + Graphite-Filled PTFE is a hybrid compound that combines the hardness and wear resistance of carbon with the lubricity of graphite. This combination delivers superior performance in dynamic sealing applications — offering lower friction than carbon-only grades and better wear resistance than graphite-only grades.
Enquiry Now →
Ceramic Filled PEEK
Sheets | Rods | Tubes | Custom Machined Components
Carbon-Filled PEEK is reinforced with carbon fibers to provide superior strength, stiffness, and thermal conductivity. It also offers excellent wear resistance and reduced thermal expansion, making it ideal for precision components operating under high loads and temperatures.
Enquiry Now →
Conductive PEEK (Polyether Ether Ketone)
Sheets | Rods | Tubes | Custom Machined Components
Conductive PEEK is formulated with conductive fillers, typically carbon-based, to provide electrical conductivity. It is designed for applications requiring static dissipation, EMI shielding, or electrical grounding.
Enquiry Now →
ESD / Anti-Static PEEK
Sheets | Rods | Tubes | Custom Machined Components
ESD / Anti-Static PEEK is specially engineered to control and dissipate static electricity, preventing charge buildup on surfaces. This makes it ideal for applications involving sensitive electronic components where electrostatic discharge can cause damage or failure.
This grade maintains the excellent mechanical strength, thermal stability, and chemical resistance of standard PEEK while offering controlled surface resistivity.
Enquiry Now →
Food Grade PEEK
Sheets | Rods | Tubes | Custom Machined Components
FDA PEEK is a food-contact compliant material suitable for use in food processing, packaging, and beverage industries. It meets regulatory requirements for safety and hygiene while maintaining the superior performance characteristics of standard PEEK.
Enquiry Now →
Glass-Filled Polytetrafluoroethylene
Available in 15%, 25% glass-fill levels | Sheets | Rods | Tubes | Machined Parts
Glass-Filled PTFE is a reinforced PTFE material containing 15% or 25% glass fibres. The glass reinforcement improves the material’s strength, creep resistance, wear resistance, and dimensional stability compared to standard Virgin PTFE. It performs reliably under continuous loads and demanding operating conditions while maintaining good chemical resistance and low friction.
It is widely used for seals, valve seats, piston rings, guide rings, thrust washers, pump components, and chemical processing equipment. It is available in sheets, rods, tubes, and custom-machined components as per customer drawings and requirements.
Enquiry Now →
Graphite-Filled Polytetrafluoroethylene
Available in 15%, 25% graphite fill levels | Sheets | Rods | Tubes | Machined Parts
Graphite-Filled PTFE combines the tribological benefits of graphite with the chemical inertness of PTFE. Graphite improves wear performance and is particularly effective in wet environments involving water and steam — unlike some other fillers, graphite does not corrode or degrade in these media.
Enquiry Now →
Medical Grade PEEK
Sheets | Rods | Tubes | Custom Machined Components
Medical Grade PEEK is a high-purity, biocompatible material designed for use in medical and healthcare applications. It complies with standards such as ISO 10993 and USP Class VI, making it suitable for implantable and non-implantable devices.
It offers excellent sterilization resistance, mechanical strength, and long-term stability inside the human body.
Enquiry Now →
MoS₂-Filled (Molybdenum Disulphide) Polytetrafluoroethylene
Available in 2%, 5% MoS₂ fill levels | Sheets | Rods | Tubes | Machined Parts
MoS₂-Filled PTFE incorporates fine particles of molybdenum disulphide, a naturally self-lubricating mineral, into the PTFE matrix. This combination delivers lower friction at higher pressures and speeds, while improving hardness and compressive properties compared to virgin PTFE.
Enquiry Now →
Nylon / Polyamide
Sheets | Rods | Tubes | Cast Blocks | Custom Machined Components
Nylon, commonly available as PA6 (Polyamide 6) and PA66 (Polyamide 66), is a high-performance engineering thermoplastic known for its excellent mechanical strength, wear resistance, and good chemical resistance. It is one of the most widely used materials in mechanical and load-bearing applications.
PE 500 (HDPE) – High Density Polyethylene
Sheets | Rods | Pipes | Custom Machined Components
PE 500, commonly known as High Density Polyethylene (HDPE), is a high molecular weight thermoplastic belonging to the polyethylene family. It is one of the most widely used engineering plastics due to its excellent impact resistance, very low friction coefficient, high chemical resistance, and outstanding abrasion resistance.
In solid form, PE 500 (HDPE) is available as sheets, rods, and blocks for machining and fabrication applications.
Due to its balance of toughness, chemical resistance, and cost-effectiveness, PE 500 remains a preferred choice for industrial, food-grade, marine, and general engineering applications.
Enquiry Now →
Showing 1–18 of 42 results